The Tensor(TM) gives you live reverse and tape stop effects, pitch shifting, time stretching and hold functions that you can combine in creative ways. Slow down, speed up and rewind in real time. Stretch or compress time with no pitch change. Loop, overdub, and randomly slice phrases up to 9.4 seconds (4.7 seconds in stereo).
Intelligent randomization adapts to the knob settings. The results range from occasional CD skips, stutters, and rhythmic repeats to random slicing and erratic pitch shifts. Both foot switches have momentary and latching modes to inject pitch jumps, glitches, or instantly rewind what you just played.
The Tensor(TM) is in a pedalboard-friendly enclosure with all jacks on top. All controls are immediately accessible with well-spaced knobs for live tweaking, and USB MIDI for recording and sequencing.
Features:
• Tape speed from reverse to stop to forward
• Realtime time stretch up to 4:1
• Loop time compression and stretch from 1:4 to 4:1
• Pitch shift from -2 to +2 octaves
• Intelligent randomization
• Overdub, replace, and dual buffer (next) loop modes
• Forward/alternate/reverse loop direction
• Additional looping functions via remote switch or MIDI
• Momentary or latching foot switches
• Assignable expression pedal, remote switch, remote tap, or MIDI port
• +5.5 dBu maximum input level (adjustable to +8 dBu)
• Stereo input/output (TRS)
• MIDI (USB and TRS)
• Web-based editor for editing presets and accessing hidden parameters
MORE»
| List | $329.00 |
Radius goes far beyond traditional ring modulation. With precise control over the balance and frequency ratios of both sidebands, you'll have more advanced control than with any ring mod that has come before. Organic, complex harmonic structures, bell-like tones, metallic textures, frequency shifting, soft tremolo, and bubbly phaser sounds are all on tap.
Pitch tracking, a push-to-tune footswitch, and picking dynamics make it responsive and predictable in concert. In the studio, Radius has well-spaced controls for tabletop use and a full MIDI implementation for DAW integration. The 24-bit 96 kHz codec, audiophile op amps and stereo input/output make it equally at home in the studio or control room. Radius is a musical ring modulator and frequency shifter that lets you modfy the timbre of your instrument in new ways.
With a multi-waveform LFO, step modulator, and MIDI-playable carrier oscillator, Radius modernizes classic electronic techniques for the future.
Features:
• Stereo ring modulator and frequency shifter
• Continuous mix between ring modulation and frequency shifting
• Selectable 2X frequency ratios for upper and lower sidebands
• Frequency shifting with feedback
• Three carrier frequency ranges (low, high, quantized)
• Carrier frequency pitch tracking (monophonic, +/- 100%)
• Pust-to-tone carrier oscillator
• MIDI-playable carrier oscillator
• Multi-waveform LFO (triangle, square, random, intelligent random, X mod +/-)
• Step modulator (1-8 steps), programmable via front panel
• Tap tempo and MIDI clock sync
• Envelope follower
• Envelope-triggered LFO (one-shot ramp, pulse, random, step mod)
• Configurable AUX switch (tap, tune, preset, LFO)
• USB and TRS MIDI
• Full MIDI implementation
• 96 kHz sampling rate
• Web editor with preset upload/download
• User-installable firmware updates (USB)
Designed and assembled in USA. Requires a 9V DC 250 mA power supply (not included).
MORE»
| List | $349.00 |
Particle™ is a granular delay/pitch shifting pedal. It chops your signal into small grains and then rearranges, shifts, and mangles it, using the techniques of granular synthesis in real time. Results range from radical pitch and delay modulation to shimmering repeats to time stretching, stutter, and glitch sounds.
Five delay and three pitch modes give intuitive control over random delays, bubbling textures, time stretching, and rhythmic glitches. Take a unique approach beyond conventional delay, pitch, flanging, and chorus sounds. Freeze notes with adjustable threshold for stutter, punch in, or drone-line effects. Lock multiple parameters to tap tempo or MIDI sync with independent note divisions for intricate rhythms. Access all parameters via MIDI, tablet, or “modeless” front-panel operation for full control over granular processing.
The Particle 2 is performance friendly, with controls spaced for real-time tweaking and designed so you can explore new sonic territory while remaining in control. Use the assignable expression pedal or DIY-friendly remote switch for hands-free control. The Particle 2 is pedalboard-friendly with all jacks on top. With full MIDI control, stereo input/output, and +8 dBu maximum input level, it is also at home in modular setups or the studio.
Features:
• 3 pitch modes: detune, density, LFO
• 5 delay modes: random, density, LFO, random pitch, reverse
• Adjustable grain size and density
• Pitch shift +/- 1 octave
• Delay 0-2.5 seconds
• Feedback with adjustable lowpass filter
• Auto-freeze/stutter with adjustable threshold
• Tap tempo/momentary freeze footswitch
• Independent tap divisions for delay time, grain size, grain density, and LFO
• Soft touch bypass (momentary or latching), user replaceable
• Stereo input/output (TRS)
• Assignable expression pedal, remote switch, remote tap, or MIDI port
• Additional parameters via MIDI (USB or TRS)
• MIDI clock synchronization
• Presets (4 on front, 127 via MIDI)
• Web-based editor for editing presets and accessing hidden parameters
Designed and assembled in USA. Requires a 9V 250 mA center negative power supply (not included).
MORE»
| List | $329.00 |
The Warm Audio Centavo is an accurate recreation of the most sought-after overdrive pedal of the 90's and beyond. Whether you're after the fabled clean boost tones, transparent overdrive, or you want to push your dirty channels to true grit, the Centavo has all of the adored tones of the vintage box. In addition, the Warm Audio Centavo has the infamous “MOD” selectable on the back. When in the “up” position, low-end response on the bottom strings is extended. With a true-to-original, custom-cast golden enclosure & all the signature sounds of the original, Centavo delivers an authentically legendary pedal experience.
MORE»
| List | $179.00 |
Pro level quality at an entry level price. The new Mini Classic Switchless Wah comes equipped with the great features our Wah pedals are known for, all for just $129. Yes, you read that correctly! Just $129. You get classic Wah-Wah tone with our MQ2 Inductor, dependable Electro-Optical circuitry, smooth and easy Switchless activation, and our True Tone Bypass Buffer circuitry.
Features include:
• Switchless operation – simply step on the treadle to engage the Wah and step off to bypass
• Engineered to save space on your board
• World famous Electro-Optical design
• Classic Wah tone with a custom MQ2 Inductor
• True Tone Bypass buffer circuit ensures pure guitar tone and output
• Glow-in-the-dark treadle rubber and Morley logo
• Powered by one 9-volt battery or optional Morley 9V adapter
• Rugged cold-rolled steel housing, LED indication, quick clip battery door and one-year warranty
• Works with Guitar, Bass or Keys
MORE»
| List | $129.00 |
From light Lo-Fi modulation all the way to the piercing sound of infinity ring-modulation, the Warm Audio RingerBringer accurately recreates the ultimate all-analog ring modulation effect used for experimental tones. With LFO, MOD, FREQ & RATE controls, generate layered frequencies and harmonics, explore a wide range of sonic possibilities for guitar & beyond, and design your own sounds from the ground up. Sporting premium components including hand-selected op-amps and transistors, the RingerBringer delivers true-to-spec performance of the boutique original. The ideal platform for the sonic tinkerer, RingerBringer brings together a distinct set of controls, extensive in/out options, and rich sonic texture to inspire boundless sonic experimentation.
MORE»
| List | $219.00 |
POD® Express Guitar is an ultra-portable amp and effects processor that enables you to take your tones wherever you choose. Simple controls make it easy to use, while models derived from the award-winning HX® family of processors ensure exceptional sound quality and authentic feel. POD® Express Guitar gives you seven amps, seven cabs, and 17 distortion, modulation, reverb and delay effects – including a looper – and it may be powered by three AA batteries (included) or an optional 9-volt power supply. Additional features include stereo outputs, tap tempo, a tuner, a noise gate, a headphone output, and a USB-C audio interface with re-amping capabilities. Add an optional expression pedal for volume control, or up to two footswitches to select presets or turn effects on and off. Wherever you play music – take POD® Express Guitar!
• Ultra-portable design lets guitarists take it anywhere
• Simple controls make it easy to quickly dial in tones
• HX-quality models for exceptional sound and feel
• 7 Amps, 7 cabs, and 17 effects, including a looper
• Powered by 3 AA batteries or an optional 9-volt power supply
• Stereo Main outputs and stereo headphone output
• USB-C audio interface for recording, monitoring, re-amping
• Connect an optional expression pedal or 2 external footswitches
MORE»
| List | $179.99 |
The Warmdrive is a true reproduction of a highly revered pedal known for delivering the tones of an unattainable overdriven amp. The original pedal is known to go from silky-smooth tones reminiscent of a special overdriven amp at the sweet spot, all the way to sustain-rich distortion. The Warmdrive combines carefully-selected components & true-to-original circuit design to achieve the same tone and sonic profile of the legendary pedal. The “secret sauce” of the Warmdrive, just like the original, is the unique voice/tone control combination on the stomp box. Giving artists extra versatility, this control allows the player to modify the frequency both before (Voice control) and after (Tone control) the clipping stages.
MORE»
| List | $149.00 |
The Warm Audio WarmBender features dedicated selectable circuits for delivering two of the most iconic Tone Bender fuzz tones plus a bonus modern tone in one stomp box. WarmBender's NOS 76 setting brings a cutting, present tone to the front of any band, while the NOS 75 delivers that Mark II Professional-style Bender fuzz tone lauded by all the Riff-Lords of the 60s and 70s. WarmBender is made with 100% through-hole construction using NOS Germanium transistors. WarmBender houses two distinct Germanium fuzz circuits plus a third modern silicon circuit for a more smooth, distortion-like tone. With the added SAG control starving the voltage and the smaller pedal footprint, WarmBender is the ultimate Bender fuzz experience.
MORE»
| List | $199.00 |
HX Stomp™ is a professional-grade multi-effects processor that delivers the sound of Helix® amps, cabs, and effects in an ultra-compact pedal. Use it as a “super stompbox,” a backup or travel rig, an add-on tone expander when combined with other modelers, an audio interface – or even a complete guitar or bass rig. The same HX Modeling technology that powers the flagship Helix guitar processor enables HX Stomp to run up to six processing blocks simultaneously, making it the most powerful and flexible stompbox-sized multi-effects processor available. HX Stomp is easy to operate, however, thanks to its simple-but-powerful controls, 320 x 240-pixel color LCD, and capacitive-sensing footswitches with color-coded LED rings. External control via MIDI and optional expression pedal and footswitch control provide additional flexibility, as does I/O that may be configured for sophisticated routing such as simultaneously feeding an amp and a FOH mixer, 4-cable method operation with an amplifier, and studio re-amping. Along with over 300 amps, cabs, and effects – even a looper – HX Stomp includes a legacy library of effects from Line 6® M-Series pedals, as well as from classic Line 6 stompbox modelers such as the DL4™, MM4™, FM4™, and DM4™. There are also presets created specifically for bass players, as well as individual bass amp and cab models. The free HX Edit app offers preset librarian functionality and third-party IR loading.
• Utilizes the same HX Modeling as Helix
• Over 300 effects and models from Helix, M-Series, and legacy Line 6 products
• Up to 6 simultaneous amp, cab, and effect blocks (including a looper and IR loading)
• 3 capacitive-sensing footswitches with color-coded LED rings facilitate fast editing
• TRS dual expression pedal/footswitch input extends creative control capabilities
• Stereo effects loop (mono/stereo TRS send + stereo returns) facilitates use with other pedals
MORE»
| List | $699.99 |
The Next Gen of a Classic
Soul Press II is a next-gen product in the Hotone Press series pedal line. It's new-designed upgrade based on the popular concepts of both the Soul Press and Vow Press. It integrates up to four function modes (volume, wah, volume/wah, expression), taking playability to new heights. The pedal position indicator shows the pedal position in real time. The TONE mode selection and Q value adjustment represent an absolute improvement in tone and functionality. Multiple I/O options provide more diverse access. The reimagined pedal size maintains portability while delivering an optimal ergonomic experience. Soul Press II is a truly versatile wah pedal.
MORE»
| List | $119.99 |
In collaboration with Cory Wong, this Wong Press is a 4-in-1 Press pedal and features Cory's personal specs: Iconic blue & white color combination, customized volume control curve, fine-tuned wah Q range, and a dual-color STATUS LED strip indicating current mode/pedal position simultaneously.
FEATURES:
• Cory Wong's signature Press pedal featuring his personal specs
• True Bypass
• 4 in 1 functionality (volume, expression, wah, volume/wah)
• New dual-color STATUS LED strip indicating pedal mode and position in real time
• Cory's custom volume curve and wah Q control
• Classic-voiced wah tone with flexible tonal range
• Active volume design for keeping lossless tone
• Separate tuner and expression outputs for more connection possibilities
• Uses 9V DC or 9V battery power supply
MORE»
| List | $199.99 |
Designed for both acoustic and electric instruments, the Hotone Omni AC is a compact, acoustic simulator pedal that delivers realistic acoustic instrument emulations. These exceptionally authentic sounds are the result of new Black-Tek acoustic simulation technology, which is built on Hotone's CDCM (Comprehensive Dynamic Circuit Modeling) architecture. The Omni AC offers 15 high-quality acoustic simulations, including steel and nylon string guitars, mandolin, acoustic fretless acoustic bass, and classic double basses. A detailed 4-band semi-parametric EQ is included to further tailor the sound. An internal voltage boost circuit provides tons of headroom ensuring the input signal will stay clean, regardless of the instrument's output level. A high-contrast OLED screen makes editing and recalling setting easy in high and low light environments. Omni AC has 15 editable presets which can be adjusted on the pedal or managed via free Mac/PC software. The footswitch can be assigned to bypass the effect or mute the signal. A 1/4″ thru jack provides an unprocessed dry signal to other devices or amplifiers. The pedal includes a 1/4″ output, a balanced XLR out to connect to mixers or audio interfaces, an 1/8″ headphone monitor and an 1/8″ stereo aux input making the Omni AC perfect for both live and recording setups.
Features include:
• Compact, easy-to-use acoustic simulator pedal
• Advanced DSP-powered platform ensures high sound quality
• 24-bit AD/DA conversion, great dynamic response
• Internal voltage boost circuit for exceptional headroom
• 15 high-quality acoustic simulations via Hotone's new Black-Tek modeling
• Detailed 4-band semi-parametric EQ with 12dB maximum boost and cut
• Micro USB jack for updating firmware and loading/managing presets via free Mac/PC software
• 1/4″ input and thruput
• XLR and 1/4″ outputs
• Ground/Lift switch
• 1/8″ stereo Aux In for line level devices (unaffected by Omni AC)
• 1/8″ headphone output for practicing and jamming
• 15 presets
• High-contrast OLED screen
• Assignable footswitch with LED
• 9V DC (center positive) power supply and USB micro cable included
MORE»
| List | $149.99 |
The new Foxy Tone Box from Warm Audio is a hyper-accurate recreation of one of the most sought-after and beloved fuzz pedals of all time – used in the early seventies by legendary tone masters Billy Gibbons and Peter Frampton, and in the present day by folks like Adrian Belew, Nine Inch Nails and Beck. Covered in thick velvet just like the vintage pedal, the Warm Audio Foxy Tone Box faithfully recreates the vintage circuit and brings you the huge tone, octave-up sounds and look of the original...without having to pay crazy vintage prices!
MORE»
| List | $149.00 |
The Raster is a 1600 ms digital delay with a pitch and frequency shifter integrated into the feedback path. Forward or reverse delay can be shifted once or have continuously shifted repeats. Three delay ranges allow you to precisely dial in resonant feedback and instantly change delay time with rhythmic shifts. The feedback control has infinite repeats at 3 o'clock and chaotic, textured feedback loops at higher levels. Knob responses are carefully tuned for exploration of self-oscillation and feedback on the verge of blowing up. A tone control sweeps from dark analog-style repeats to digital clarity and emphasizes the attack at higher settings. The left and right delay times can be set as a ratio, so a single knob changes both in sync. The two delay channels can be arranged in series, parallel or ping pong.
Three pitch and frequency shifting algorithms are integrated into the feedback loop. Pitch shifting repeats up or down in semitone steps creates tempo-synced arpeggios and alien organ sounds. The detune setting can dial in micro pitch shifts and chorused repeats. The frequency shifter creates flanger-like textures and radical dissonant echoes. The left and right channels can be shifted by the same amount, a ratio, or opposite directions. At subtle settings, repeats evolve in a way that sounds natural, but different from analog delays.
The Raster's modulation section has seven waveforms that can be assigned to delay time, pitch shift, or effect level (for tremolo). There are two random waveforms for glitchy sliced delays or random pitch shift, wow and flutter, and broken tape deck effects. Envelope and inverse envelope enable dynamic flanging and pitch bent delays. Stereo controls adjust the modulation amount and phase between channels, for subtle shifts or swirling psychedelic washes.
The Raster 2 is performance friendly, with 6 knobs and 9 switches. The original Raster was praised for its knob response and immediacy, and the Raster 2 maintains that simplicity while adding flexible modulation and extensive stereo functionality. Alternate knob settings are related to the primary knob function, labeled, and off at the center position. Both footswitches can be latching or momentary, for instant pitch jumps or quick blasts of echo. The bypass switch can also mute the output in bypass while always listening, to catch, repeat, and manipulate what you just played.
The Raster is designed and assembled in Plymouth, MI, USA.
MORE»
| List | $329.00 |