25 Items Found
HAL LEONARD
iRig Micro Amp: 15-Watt Battery-Powered Guitar Amplifier with iOS/USB
Model: 00294406

iRig Micro Amp is a compact, battery-powered amp that lets you do more. At up to 15W RMS, it's louder than you'd expect and covers a range of tones, with 3 custom-voiced analog channels: clean, drive, and lead. But iRig Micro Amp's real magic comes from the included high-quality connection to your iPhone, iPad and Mac/PC. Jam through 10 amp and 26 stompbox models with the included AmpliTube app, plus 9 amp and 10 stomp models from AmpliTube 4 on Mac/PC. Plus, iRig Micro Amp's connection lets you plug into all your favorite apps and software. Learn new songs, practice your favorite licks, perform with backing tracks, and even record your own songs easier than you ever imagined.

iRig Micro Amp offers 15W power when plugged in, and 7.5W when running on 6 x AA batteries. Combined with a 4″ custom-voiced speaker, it pumps out surprising volume at half the size of similarly-powered amps. So it's perfect for everything from a bedroom to a laptop or desktop, and to jamming with friends or street busking.

Need more volume or a bigger speaker? iRig Micro Amp also offers a cabinet output, so it can keep up with a full drum kit for band practice. An aux input lets you connect any analog input, like an MP3 player, to jam along, and a headphone output is perfect for silent practice.

iRig Micro Amp also connects to your iPhone, iPad, Mac and PC, routing your guitar's signal to your device to process or record, and plays back directly through the 4″ speaker. It's an entire setup in a single integrated unit derived from IK's award-winning iRig HD 2 mobile guitar interface, with 24-bit, 96 kHz for pristine sound quality.

Beyond AmpliTube, iRig Micro Amp opens the door lets you connect to an endless array of apps and software. Learn new licks, brush up polish your technique, or jam along with your favorite songs – iRig Micro Amp makes it easy and fun so you'll never get bored. All this in an ultra-compact size that's easy to carry anywhere. With iRig Micro Amp you'll never stop finding ways to take your playing further. MORE»

List $149.99

Compare

LINE 6
Spider® IV 75: Guitar Amp with Modeling
Model: 00122075

The Spider® IV 75 guitar amp boasts industry-leading Line 6 amp and FX modeling, dialed-in tones and presets created by rock stars, and more. Plug into 500+ presets. Over 300+ presets were hand-crafted by 50 guitarists and bands. Almost 200 presets are based on the tones of celebrated guitar tones. Create and save 64 user presets.

Sixteen amp models deliver sparkling clean tones, syrupy drive tones, mid-gain crunch, high-gain distortions, and more. Twenty plus reverbs, delays, trems and more, plus Pitch Glide, Smart Harmony and Quick Loop.

FBV MkII foot controllers (not included) add effects and USB connectivity for updates/upgrades, including Spider FX Infusion and Spider IV Edit editor/librarian (both free from line6.com).

Features include:

• 75 watts (mono)

•¦12″ Celestion® Custom speaker

•¦Three-quarter closed-back cabinet MORE»

List $499.99

Compare

HAL LEONARD
Boss Katana-Mini Guitar Amplifier
Model: 00347827

Serious rock DNA forged into a compact, battery-powered amp. BOSS Katana amps have received accolades from guitarists everywhere for their fantastic sound and feel, onboard effects, and great value. Now, the Katana-Mini makes serious Katana tone accessible in a small, go-anywhere amp that runs on batteries. Offering sound quality that far exceeds other amps in its class, this miniature powerhouse features an authentic multi-stage analog gain circuit for big, expressive sound, plus a traditional analog EQ and an onboard tape-style delay. Ultra-compact and travel-ready, the Katana-Mini delivers inspiring Katana tone anywhere you want to play. MORE»

List $99.99

Compare

LINE 6
Spider® IV 15: Guitar Amp with Modeling
Model: 00122073

The Line 6 Spider® IV 15-watt (mono) guitar amplifier boasts industry-leading Line 6 amp and FX modeling, dialed-in tones and presets inspired by rock stars, and much more. It includes four dialed-in amp models, providing sparkling clean tones, warm jazz tones, syrupy drive tones, high-gain distortions, and more. Add color and depth to your tones with six Smart FX – lush reverb, expressive tremolo, tangy chorus/flange, and more. The Spider IV 15 features a built-in tuner, a headphone output a CD/MP3 input, and four user-created presets for instant recall of custom tones. The 8-inch custom speaker and three-quarter closed-back cabinet provide a tight, punchy response. MORE»

List $219.99

Compare

LINE 6
Spider® IV 120: Guitar Amp with Modeling
Model: 00122076

The Spider® IV 120 guitar amp boasts industry-leading Line 6 amp and FX modeling, dialed-in tones and presets created by rock stars, and much more. Plug into 500+ presets. Over 300+ presets were hand-crafted by 50 guitarists and bands. Almost 200 presets are based on celebrated guitar tones. Create and save 64 user presets.

Sixteen amp models deliver sparkling clean tones, syrupy drive tones, mid-gain crunch, high-gain distortions, and more. Twenty plus reverbs, trems and more, plus Pitch Glide, Smart Harmony and Quick Loop.

FBV MkII foot controllers (not included) add effects and USB connectivity for updates/upgrades, including Spider FX Infusion and Spider IV Edit editor/librarian (both free from line6.com).

Features include:

• 120 watts (stereo)

• 2 x 10″ Celestion® Custom speakers

•¦Three-quarter closed-back cabinet MORE»

List $669.99

Compare

LINE 6
Spider® IV 150: Guitar Amp with Modeling 2 x 12
Model: 00122078

The Spider® IV 150 guitar amp boasts industry-leading Line 6 amp and FX modeling, dialed-in tones and presets created by rock stars, and much more. Plug into 500+ presets. Over 300+ presets were hand-crafted by 50 guitarists and bands. Almost 200 presets are based on celebrated guitar tones. Create and save 64 user presets.

Sixteen amp models deliver sparkling clean tones, syrupy drive tones, mid-gain crunch, high-gain distortions, and more. Twenty plus reverbs, delays, trems and more, plus Pitch Glide, Smart Harmony and Quick Loop.

FBV MkII foot controllers (not included) add effects and USB connectivity for updates/upgrades, including Spider FX Infusion and Spider IV Edit editor/librarian (both free from line6.com).

Features include:

• 150 watts (stereo)

• 2 x 12″ Celestion® Custom speakers

•¦Three-quarter closed-back cabinet MORE»

List $829.99

Compare

LINE 6
DT25 25W/10W 1x12 Combo Guitar Tube Amplifier
Model: 00122945

The powerful combination of reconfigurable analog components and HD modeling allows the DT25 amp to be four boutique tube amps in one capable of producing stunning American cleans, British crunch, class A chime and modern high-gain. Selectable operating class, power tube mode and four Voicings (which offer the perfect combinations of negative feedback loop topology, and HD preamp and tone stack modeling) can dial in classic vintage tones or be shaped into highly customized originals – and each one drips with boutique tone and touch-response.

The DT25 amp gets to the point. It's a simple, two-channel amp with a streamlined front panel. But if you connect a POD® HD multi-effect pedal or POD® HD Pro multi-effect rack to this little monster the two integrate to become a boutique tube amp factory!

Connected via exclusive L6 LINK™ technology, the DT25 amp and POD® multi-effect rewrite the traditional amp/multi-effect paradigm and introduce powerful new concepts in control and customization. Add effects, additional amp voicings, foot control and instant scalability (including stereo operation with multiple DT25 amplifiers). DT25 is the perfect pairing for POD HD multi-effects. The days of plugging a POD® into the front of an amp are over!

The Voicing switch is the heart of DT25 amp. It conjures the characteristic tone, feel and response that are at the heart of four celebrated amp voicings: American clean, British crunch, class A chime and modern high-gain. Different negative feedback loop topologies pair with HD preamp and tone stack modeling to produce the perfect tonal springboards for you to craft your perfect tones.



• Flexible tube section designed by tube-amp guru Reinhold Bogner

• (1) 12AX7, (2) EL84 tubes

• 1x12″ Custom Celestion® G12H90 speaker

• Intuitive, 2-channel design, instantly reconfigurable per channel

• Selectable operating class (Class AB/25 Watts/Fixed Bias or Class A/10 Watts/Cathode Biased)

• Selectable power tube mode (Pentode or Triode)

• Four unique Voicings (negative feedback loop topologies paired with HD preamp and tone stack modeling): (1) Classic American Clean/Tight NFL (2) British Crunch/Medium NFL (3) Class A Chime/Zero NFL, (4) Modern, High-Gain/Resonant NFL

• HD amp modeling technology fuels each Voicing's preamp and tone stack, and automatically pairs them with corresponding Bogner-designed dynamic analog circuitry

• Both channels have Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume. Rest of front panel: Channel switch; Voicing switch; Pentode/Triode switch; Class A/Class AB switch; Master volume; Power; Standby; Backlit front panel

• L6 LINK connects the DT25 amp to a POD HD multi-effect for additional effects, amp voicings and instant scalability (including stereo operation with multiple DT25 amplifiers) – all controlled by any L6 LINK equipped POD HD multi-effect

• Series effects loop MORE»

List $1,399.99

Compare

LINE 6
DT25 25W/10W Guitar Amplifier Head
Model: 00122946

The powerful combination of reconfigurable analog components and HD modeling allows the DT25 amp to be four boutique tube amps in one capable of producing stunning American cleans, British crunch, class A chime and modern high-gain. Selectable operating class, power tube mode and four Voicings (which offer the perfect combinations of negative feedback loop topology, and HD preamp and tone stack modeling) can dial in classic vintage tones or be shaped into highly customized originals – and each one drips with boutique tone and touch-response.

Connected via exclusive L6 LINK™ technology, the DT25 amp and POD® multi-effect rewrite the traditional amp/multi-effect paradigm and introduce powerful new concepts in control and customization. Add effects, additional amp voicings, foot control and instant scalability (including stereo operation with multiple DT25 amplifiers). DT25 is the perfect pairing for POD HD multi-effects. The days of plugging a POD® into the front of an amp are over!

Take your tone in many different directions with the selectable operating classes and power tube modes. Mix and match them with the Voicing switch to dial in truly unique tones. Or align the components in tried-and-true combinations to deliver fresh takes on the immortal classics.



• Flexible tube section designed by tube-amp guru Reinhold Bogner

• (1) 12AX7, (2) EL84 tubes

• Intuitive, 2-channel design, instantly reconfigurable per channel

• Selectable operating class (Class AB/25 Watts/Fixed Bias or Class A/10 Watts/Cathode Biased)

• Selectable power tube mode (Pentode or Triode)

• Four unique Voicings (negative feedback loop topologies paired with HD preamp and tone stack modeling): (1) Classic American Clean/Tight NFL (2) British Crunch/Medium NFL (3) Class A Chime/Zero NFL, (4) Modern, High-Gain/Resonant NFL

• HD amp modeling technology fuels each Voicing's preamp and tone stack, and automatically pairs them with corresponding Bogner-designed dynamic analog circuitry

• Both channels have Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume. Rest of front panel: Channel switch; Voicing switch; Pentode/Triode switch; Class A/Class AB switch; Master volume; Power; Standby; Backlit front panel

• Modeled spring reverb with individual level control per channel

• Back-lit front panel

• 4/8/16 ohm speaker outputs

• MIDI I/O

• Series effects loop

• Cabinet simulated direct output

• Low Volume Mode provides cranked up tube tone at whisper-quiet volume

• Speaker jack-sensing provides relay driven output transformer protection circuit

• L6 LINK connects the DT25 amp to a POD HD multi-effect for additional effects, amp voicings and instant scalability (including stereo operation with multiple DT25 amplifiers) – all controlled by any L6 LINK equipped POD HD multi-effect MORE»

List $1,289.99

Compare

LINE 6
DT25 1x12 Extension Guitar Speaker Cabinet
Model: 00122947

The DT25™ 1x12 Extension Cabinet is the perfect pairing for the portable DT25™ 25W/10W tube amp from Line 6 and tube-amp guru Reinhold Bogner. The cabinet features a front-ported, closed-back design that produces a HUGE sound much bigger than its small footprint. The 12-inch custom Celestion® G12H-90 speaker delivers clean tones that sparkle and sing, creamy overdrives that respond to the intricacies of your picking and searing high-gain tones that launch themselves from the cabinet. MORE»

List $419.99

Compare

LINE 6
DT50 1x12 25/50W Guitar Amplifier
Model: 00122948

DT50™ goes further than any other amplifier to produce the best amp tones. Many amplifiers offer either modeling technology or reconfigurable analog circuitry, but DT50 offers both to deliver something bigger than the sum of its parts. New HD modeling technology, a host of switchable analog components, and a simple and elegant 2-channel interface – DT50 guitar amplifiers are in a category all their own.

New Line 6 HD modeling technology fully integrates with Reinhold Bogner's most flexible tube design. They breathe unparalleled warmth, feel and depth into the amp voicings on which all great amplifiers are based – classic American cleans, chimey and crunchy English tones, and modern high-gain distortion. The 4-way Voicing switch is the heart of DT50, and flicking this switch starts a chain reaction that produces these incredible tones.

Sonic flexibility is a big part of the DT50 blueprint. Fortifying that concept is the behind-the-scenes communication between the tube sections and the HD amp modeling technology. Each one adapts and adjusts based on what the other is doing. For example, at high volumes the HD amp modeling technology “backs off” to allow for the natural power-tube distortion to take over and color the tone. At low volumes, the opposite happens. As a result, DT50 yields outstanding “sweet spot” tone at all volume levels.



•Brand-new Line 6 HD amp modeling technology seamlessly integrates with Reinhold Bogner's uniquely (and extremely) versatile tube sections

•DT50 goes further than any other amplifier to produce great amp tones. Many amplifiers offer either modeling technology or reconfigurable analog circuitry, but DT50 offers both to deliver something bigger than the sum of its parts

• Reconfigurable analog circuitry: negative feedback loop, operating class (class A, class AB), power tube mode (pentode/triode); low-power mode; 2-channel design

• (2) 12AX7 preamp; (2) EL34 power amp; 12″ Custom Celestion® G12H90 speaker

• Front panel: (Channels A and B) Drive, Bass, Mid Treble, Presence, Reverb, Channel Volume; Channel switch; Voicing switch; Pentode/Triode switch; Class A/Class AB switch; Master volume; Power; Standby

• Back panel: MIDI I/O; Channel footswitch input; L6 LINK™ in and out/thru; FX loop with Level control; Balanced direct out; Speaker outs (4 ohm, 8 ohm and 16 ohm)

• Connect a POD® HD multi-effect pedal to control all DT50 Voicings and parameters from the floor while taking advantage of POD HD's enormous collections of FX and HD amp models MORE»

List $1,849.99

Compare

LINE 6
DT50 2x12 25/50W Guitar Amplifier
Model: 00122949

DT50™ goes further than any other amplifier to produce the best amp tones. Many amplifiers offer either modeling technology or reconfigurable analog circuitry, but DT50 offers both to deliver something bigger than the sum of its parts. New HD modeling technology, a host of switchable analog components, and a simple and elegant 2-channel interface – DT50 guitar amplifiers are in a category all their own.

Brand-new Line 6 HD modeling technology fuels each Voicing's preamp and tone stack, and automatically pairs them with dynamic analog circuitry including tube configuration and negative feedback topology (courtesy of Reinhold Bogner's uniquely versatile 50-watt, EL34 power section). You get high amounts of negative feedback when you want your American clean tones to gleam and shine, zero negative feedback when you want your chimey English tones to sport their signature dynamics, and everything in between. All four Voicings deliver their heralded sonic signatures.

Get total analog reconfiguration with one touch. Any combination of Voicing, operating class and power tube mode can be assigned to either channel. For example, Channel A can be Voicing I/Class A/Pentode, and Channel B can be Voicing IV/Class AB/Triode. This streamlined and straightforward layout is free of complexity and learning curve, and is ideal for any gigging musician.

Sonic flexibility is a big part of the DT50 blueprint. Fortifying that concept is the behind-the-scenes communication between the tube sections and the HD amp modeling technology. Each one adapts and adjusts based on what the other is doing. For example, at high volumes the HD amp modeling technology “backs off” to allow for the natural power-tube distortion to take over and color the tone. At low volumes, the opposite happens. As a result, DT50 yields outstanding “sweet spot” tone at all volume levels.



• DT50 goes further than any other amplifier to produce great amp tones. Many amplifiers offer either modeling technology or reconfigurable analog circuitry, but DT50 offers both to deliver something bigger than the sum of its parts

• Reconfigurable analog circuitry: negative feedback loop, operating class (class A, class AB), power tube mode (pentode/triode); low-power mode; 2-channel design

• (2) 12AX7 preamp; (2) EL34 power amp; 12″ Custom Celestion® G12H90 speaker; 12″ Celestion® Vintage 30 speaker

• Front panel: (Channels A and B) Drive, Bass, Mid Treble, Presence, Reverb, Channel Volume; Channel switch; Voicing switch; Pentode/Tritode switch; Class A/Class AB switch; Master volume; Power; Standby

• Back panel: MIDI I/O; Channel footswitch input; L6 LINK™ in and out/thru; FX loop with Level control; Balanced direct out; Speaker outs (4 ohm, 8 ohm and 16 ohm) MORE»

List $2,149.99

Compare

LINE 6
DT50 Head 25/50W Guitar Amplifier
Model: 00122950

DT50™ goes further than any other amplifier to produce the best amp tones. Many amplifiers offer either modeling technology or reconfigurable analog circuitry, but DT50 offers both to deliver something bigger than the sum of its parts. New HD modeling technology, a host of switchable analog components, and a simple and elegant 2-channel interface – DT50 guitar amplifiers are in a category all their own.

Brand-new Line 6 HD modeling technology fuels each Voicing's preamp and tone stack, and automatically pairs them with dynamic analog circuitry including tube configuration and negative feedback topology (courtesy of Reinhold Bogner's uniquely versatile 50-watt, EL34 power section). You get high amounts of negative feedback when you want your American clean tones to gleam and shine, zero negative feedback when you want your chimey English tones to sport their signature dynamics, and everything in between. All four Voicings deliver their heralded sonic signatures.

Sonic flexibility is a big part of the DT50 blueprint. Fortifying that concept is the behind-the-scenes communication between the tube sections and the HD amp modeling technology. Each one adapts and adjusts based on what the other is doing. For example, at high volumes the HD amp modeling technology “backs off” to allow for the natural power-tube distortion to take over and color the tone. At low volumes, the opposite happens. As a result, DT50 yields outstanding “sweet spot” tone at all volume levels.



• Brand-new Line 6 HD amp modeling technology seamlessly integrates with Reinhold Bogner's uniquely (and extremely) versatile tube sections

• DT50 goes further than any other amplifier to produce great amp tones. Many amplifiers offer either modeling technology or reconfigurable analog circuitry, but DT50 offers both to deliver something bigger than the sum of its parts

• (2) 12AX7 preamp; (2) EL34 power amp; Reconfigurable analog circuitry: negative feedback loop, operating class (class A, class AB), power tube mode (pentode/triode); low-power mode; 2-channel design

• Front panel: (Channels A and B) Drive, Bass, Mid Treble, Presence, Reverb, Channel Volume; Channel switch; Voicing switch; Pentode/Triode switch; Class A/Class AB switch; Master volume; Power; Standby

• Back panel: MIDI I/O; Channel footswitch input; L6 LINK™ and out/thru; FX loop with Level control; Balanced direct out; Speaker outs (4 ohm, 8 ohm and 16 ohm)

• Connect a POD® HD multi-effect pedal to control all DT50 Voicing and parameters from the flooer while taking advantage of the enormous collections of FX and HD amp models in POD HD MORE»

List $1,649.99

Compare

LINE 6
DT50 4x12 Extension Cab
Model: 00122951

Line 6 DT5™ 4x12 extension cab for DT50 guitar amplifiers. Cross-loaded with (2) 12″ Custom Celestion® G12H90 speakers and (2) 12″ Celestion® Vintage 30 speakers. Straight front with slant baffle and closed back. This cab is built to last of 11-ply poplar. Features solid, heavy-duty casters and recessed handles. 8-ohms. MORE»

List $1,149.99

Compare

LINE 6
Spider 4x12 Cabinet
Model: 00122953

Ideal cab for Spider IV HD 150, Spider III HD 75, and Spider III HD 150 heads, this 320-watt 4x12″ slant cab features stereo inputs, Custom Celestion® Speakers, and measures 27″ wide x 28″ high x 11-1/2″ in diameter. MORE»

List $419.99

Compare

LINE 6
Micro Spider (Battery-Powered Amp)
Model: 00122954

Offering attitude and flexibility unmatched by amps more than twice its size, Micro Spider has a larger-than-life Napoleon complex. Four spider amp models, a new acoustic guitar model and six Smart Control FX give Micro Spider a wide tonal range and real sonic versatility. And with POD® 2.0-style direct out, Micro Spider is ideal for practicing with headphones and hassle-free direct recording. MORE»

List $249.99

Compare