POD® Express Bass is an ultra-portable bass amp and effects processor that enables bassists to take their tones wherever they choose. Simple controls make it easy to use, while models derived from the award-winning HX® family of processors ensure exceptional sounc quality and authentic feel. POD® Express Bass gives bassists seven amps, seven cabs, and 17 distortion, compression, synth, modulation, and delay effects – including a looper – and it may be powered by three AA batteries (included) or an optional 9-volt power supply. Additional features include stereo outputs, tap tempo, a tuner, a noise gate, a headphone output, and a USB-C audio interface with re-amping capabilities. Add an optional expression pedal for volume control, or up to two footswitches to select presets or turn effects on and off.
• Ultra-portable design lets bassists take it anywhere
• Familiar controls make it easy to quickly dial in tones
• HX-quality models for exceptional sound and feel
• 7 amps, 7 cabs, and 17 effects, including a looper
• Powered by 3 AA batteries or an optional 9-volt power supply
• Stereo Main outputs and stereo headphone output
• USB-C audio interface for recording, monitoring, re-amping
• Connect an optional expression pedal or 2 external footswitches
MORE»
| List | $179.99 |
The Bit Mixer is a small, high-quality mixer designed for pedalboards. It features ultra-low distortion, low noise op amps. High-impedance inputs are designed for guitar, but work with line level signals as well. Each input has a volume knob that goes from off to unity gain. Only 4.4″ x 2.6″, and works with standard pedal power supplies from 9-18 V.
Uses:
• Connect multiple instruments to one amp
• Combine parallel effects chains
• Clean blend or analog dry path
MORE»
| List | $149.00 |
The Context is a reverb pedal inspired by 1980's rack mount reverbs. It has 8 algorithms, including room, hall, cathedral, gated reverb, reverse reverb, plate, spring, and a granular reverb. Each algorithm features separate high and low frequency damping controls, pre-delay, modulation, dynamics (duck/expand), and infinite hold. In addition, delay is always available, along with tremolo in spring mode.
The modulation knob changes the amount and character of the internal reverb modulation, specific to each algorithm. It gives you a mix of different modulation types from 1980's and early 90's reverbs, including chorus modulation, random modulation that keeps the pitch stable, and deep modulated reverbs. Holding down the shift button adjusts the modulation rate.
Reverse reverb fades in louder and brighter over time, giving the impression of playing backwards. Modulation adds a wash of normal reverb.
The spring reverb was designed using the techniques and algorithms that were used in 1980's reverbs, but with enough DSP power to drip and feel like a spring tank. You can adjust the length of the decay, high and low frequency damping. The modulation is tremolo with adjustable intensity and speed.
Grain mode is a granular reverb inspired by the Ursa Major SST-282 Space Station. The SST-282 was released in 1978 and used multiple delay taps with modulation to create reverb effects. The Context can create ghostly reverb effects, slowly sweeping resonances, and at higher modulation settings is a multi-voice granular processor that creates clouds of detuned sound fragments for entirely new reverb sounds.
When the shift button is held down, the top row of knobs adjust delay parameters. The low and high damping knobs adjust dynamics for ducking reverb or an expander for more reverb on louder notes, with adjustable threshold and recovery time. Holding down the foot switches gives you two different types of infinite sustain.
One preset available on the left footswitch, 4 using a remote footswitch, and 127 via MIDI. The expression pedal can be assigned to any combination of parameters. We also have a web-based editor for tweaking and managing your presets.
Designed and assembled in USA. The Context 2 requires a 9 V 250 mA center negative power supply (not included).
MORE»
| List | $329.00 |
With its simple plug-and-play interface, ultra-portable lightweight design, and best-in-class tones, the POD® Go guitar processor gets you on the road to ultimate tone.
POD Go enables a simple and intuitive workflow. Choose, edit, and control sounds using the large color LCD screen, five push encoders, eight rugged footswitches, and cast-aluminum multi-function expression pedal–and add two external footswitches or a second expression pedal for even more real-time control. All the essential audio connections are at your fingertips, too, including balanced stereo outputs, a duplicate amp out that can be tapped before the Cab/IR, a stereo effects loop, a headphone jack, and even a USB port for accessing the 4-in/4-out audio interface with re-amping.
POD Go boasts an arsenal of professional-quality amp, cab, and effect models drawn from the acclaimed HX family of effects processors–including classic amps like the Blackface, Plexi Lead, and Treadplate–as well as supporting third-party IR loading. What is more, sophisticated features such as Snapshots enable you to easily access all the tones you'll need to cover every section of every song. With POD Go, you won't just take the stage–you'll own it!
• Best-in-class performance
• Simple interface with large color display
• Compact, ultra-portable lightweight design
• 270+ HX and legacy amp and effects models
• Third-party IR loading
• Stereo effects loop and Expression Pedal/Footswitch input
• Free POD Go Edit app
MORE»
| List | $669.99 |
This pedal will transform your guitar rig!
Don't let the Vertex Boost MKII's name fool you–it's much more than a mere boost. Make no mistake, this multifunction guitar pedal can function as a gain booster, with +16dB of ultra-transparent gain that can either drive your amp into saturation or give your solos a squeaky-clean level bump, depending on where you choose to deploy it. Able to accommodate both line- and instrument-level signals, the Boost MKII also includes ultra-linear input/output buffers that are guaranteed to elevate the sound of your entire rig. This stompbox's buffers can propel a typical mid-level rig into pro-level territory with zero tonal coloration. And if your rig is already 99% of the way there, the Boost MKII will deliver that elusive missing 1%. Beyond that, the Boost MKII's insert jack enables you to adjust your volume via an external treadle-style pedal while keeping your guitar's signal completely isolated–it's like plugging straight into your amp. Boasting a compact enclosure that's 33% slimmer than its predecessor, the Vertex Boost MkII belongs on every tone-obsessed guitarist's pedalboard.
OFFERS MORE THAN +16DB OF EXTRA GAIN WITH ZERO SONIC COLORATION
While the Boost MKII offers a myriad of useful functions, it's a clean booster pedal at heart. Its straightforward Level knob ranges from unity gain to a healthy +16dB. Placing the Boost MKII in front of your amp or dirt boxes adds saturation and sustain to your signal, while placing it after your preamp and dirt boxes gives you a full-range level increase. Best off all, the Boost MKII doesn't change the tone of anything that comes before it's sonically invisible.
INPUT AND OUTPUT BUFFERS OPTIMIZE YOUR SIGNAL PATH FOR MAXIMUM TONE
Guitarists are always searching for new ways to elevate the sound of their rig. Thanks to its top-shelf input and output buffers, the Vertex Boost MKII will do just that. How can a set of buffers transform a noisy, novice-sounding rig into a quiet, pro-level one? For starters, these buffers condition your rig's entire analog signal path, ensuring optimal input and stable output. They also exhibit an unprecedented level of linearity, while ensuring zero coloration of your signal–even with dozens of stompboxes in your chain. The Boost MKII's input buffer compensates for pickups with different impedances, ensuring that both single-coil- and humbucker-equipped guitars retain every ounce of their tone, while its output buffer tackles arena-sized cable runs like a a champ. Got a hissy, interference-prone passive effects loop? Not anymore – the Boost MKII will convert it into a max-quality, whisper-quiet active loop.
CONTROL YOUR VOLUME WITH AN EXTERNAL VOLUME OR EXP PEDAL
On the rear of the Boost MKII, you'll find a 1/8-inch TRS insert. This enables you to control your volume using an external treadle-style pedal. When the Boost
MORE»
| List | $199.99 |
The hard-clipping, op-amp-based circuit of the ODD (Over Drive Disorder) delivers all of the sounds of a cranked, saturated tube amp made famous in legendary recordings. True to its inspiration, the ODD is perfect for adding a little breakup to an otherwise clean tone, or dramatically transforming your clean pedal-platform amp into a punk-rock powerhouse. To accurately deliver this popular modern tone, the ODD is built like an iconic pedalboard staple with through-hole construction using premium components, including a TLO82CP Op-Amp, 2N7000 transistors, & hand-selected capacitors & resistors.
Featuring classic-inspired controls & sounds, including a UK/US Switch, the ODD can quickly flip personalities. Engaging the UK setting distorts earlier, bumps the upper-mids, and increases volume – giving this setting more of a cranked, “chimey” amplifier tone. The US setting has a little more clean headroom, allowing the ODD to act more like a boost at first, and better aligns with traditional tweed-based “edge of breakup” amplifier tones.
MORE»
| List | $119.00 |
The HX Stomp XL delivers HX® modeling in a performance-ready pedal with eight capacitive-touch footswitches. The same SHARC® DSP chip found in Helix® enables it to run up to eight processing blocks simultaneously, and the footswitches let you access and control those blocks in powerful ways. It sends and receives Program Change, Continuous Controller, and other MIDI messages. USB HX Stomp XL functions as a multi-channel 24-bit/96kHz audio interface for Mac and PC, with DI, re-amping, and MIDI capabilities built in. HX Stomp XL can also record to an iPad (with optional Apple Camera Connection Kit).
MORE»
| List | $949.99 |
The Warm Audio Mutation Phasor II is an accurate recreation of a swirly phaser made famous in the experimental era of the 1970s. Mutation Phasor II has all of the vintage vibes of the original phaser pedal allowing you to add depth, wobble, swirl, or “instant funk” to guitar, keys, bass, or anything you can dream of. This electro-optical phase-shifting pedal is built with a true-to-original recreation of the 70s circuit using premium components. True to the original pedal, Mutation Phasor II delivers all the rich depth and instant psychedelic tones, favored by innovative musicians and producers like Billy Corgan, Tom Bukovac, Robin Trower, and many more.
Tech Specs
• Electro-Optical Phase-Shifting Pedal With Feedback Circuit
• Phasing Rate: .1Hz - 18Hz
• Premium Components, Including RC4558P Op-Amps, Various Vintage-Style Diodes, and Hand-Selected Film Capacitors & Carbon Resistors
• Controls: Rate, Depth, and Feedback
• Frequency Response: 20Hz - 20KHz
• Min Feedback: 4V RMS, 11.2V Peak-to-Peak ¦ Max Feedback: 2V RMS, 5.6V Peak-to-Peak
• Signal-to-Noise Ratio: 86 dB Below 2V Input
• Current Draw: 150 mA
• Buffered Bypass
• 9-Volt Battery Or External 9V Regulated DC Adapter (center-negative)
Popular Uses
• Deep, Phase-Shifting Electric Guitar Tones
• Swirling, Psychedelic Modulated Keys
• Funky. “Wobbly” Base Lines
MORE»
| List | $149.00 |
The WA-C1 Chorus Vibrato is a faithful recreation of the most celebrated all-analog chorus in guitar pedal history with additional no-compromise features for exploring legendary modulated tones. The WA-C1 starts with a premium, all-analog preamp known for being a favorite of guitar players who demand ultra-responsiveness. The lush chorus setting features separated depth and rate controls to expand beyond the limitations of vintage units while delivering true-to-original tone. The vibrato section is preserved as authentic to the original pedals, and an added hi-z switch on the back of the pedal allows players to compensate for higher impedance of guitars vs keyboards to add clarity to the high end on guitars if desired.
Tech Specs:
• 100% Analog Stereo Chorus & Vibrato Pedal with Depth & Rate controls & Selectable Impedance
• Controls: High/Low Input Sensitivity, Preamp Level, Chorus Depth & Rate, Vibrato Depth & Rate, Effect On/Off, Chorus/Vibrato Switch, Hi-Z On/Off.
• Components: (5X) IC's (Including 3X Texas Instruments Premium Audio Op Amps in Signal Path) ¦ (11X) Discrete Transistors ¦ (3X) FETs ¦ (19X) Diodes 2 x MOSFETs and a premium Xvive MN3007 BBD chip recreation.
• Power consumption: 800mW; 90mA at 9V with Vintage-Correct Internal Voltage Operation Via Dual DC-DC Voltage Converter
• Input sensitivity: 80mV / 1 0mV
•Output level: 315mV
• Jacks: (1X) Input, (2X) Outputs
• Dimensions: W: 6.5″ ¦ H: 3.8″ ¦ D: 1.6″ ¦ Weight: 1.9 lbs
MORE»
| List | $189.00 |
The Pedal76 accurately reproduces one of the fastest and most powerful studio compressors of all time known for ultra-responsive dynamic control with rich analog tone. Using premium and custom components spec'd to duplicate the professional performance and tone of studio units, PEDAL76 achieves authentic 76-style FET compression. Added grit from the FET, the rich character of the transformer, and critical gig-ready controls make Pedal76 an ideal choice for recreating timeless studio sound on stage. PEDAL76 recreates the legendary tone & control of the vintage 76-style compression used in studios by artists like Jack White, John Mayer, Foo Fighters, Van Halen, Led Zeppelin, and many more.
Tech Specs:
• All-Analog Transformer-Balanced FET Compressor Pedal
• Custom CineMag USA Output Transformer (Engaged wtih External Power)
• Classic 76-Style Compression Controls: Radio, Attack, Release, Output, & Input
• Additional Controls: Input Sensitivity, Ground/Lift, DI Output Pad, DI High/Low Gain with Level Boost on Balanced Output
• External True or Buffered Bypass Switch
• Vintage-Style Amber VU Meter for Gain Reduction Indication
• Ultra Low-Noise with 100% Discrete Analog Signal Path
• External Power Supply with 9V Battery Compartment. External Power Supply Leverages Internal Voltage Increase via DC-DC Voltage Converter
• Dimensions: 5.9″ x 4.1″ x 1.9″ ¦ Weight: 1.65 lbs
MORE»
| List | $269.00 |
HX One is a powerful stereo effect pedal with intuitive controls that fits onto any pedalboard. Select one of 250+ effects taken from the acclaimed HX family processors and easily adjust the parameters displayed on the OLED screen using the three corresponding knobs. You can also automate parameter changes via the unique Flux controller and trigger them with the Tap/Flux footswitch. Connect an optional expression pedal or two external footswitches for additional control.
HX One also provides adjustable input impedance; a choice of True Bypass or buffered DSP Bypass; MIDI In and Out/Thru connectors; 128 Presets; and a USB-C port for firmware updates and use with the HX One Preset Librarian application. HX One may be powered using the included 9V power supply or most third-party power supplies, making it easy to add to your pedalboard.
Features:
• 250+ effects taken from the HX family processors
• Intuitive controls make selecting and editing effects easy
• Flux Controller for automating parameter changes
• Adjustable input impedance to match your instrument
• Connect an optional expression pedal or 2 external footswitches
• MIDI In, Out/Thru connectors (receives PC and CC messages)
• Stereo I/O with choice of True Bypass or buffered DSP Bypass
• 128 preset slots
• USB-C port for firmware updates and use with HX® One Preset Librarian
• 9V power supply included
MORE»
| List | $391.99 |
The latest addition to Hotone's Nano Legacy Floor Series, the Loudster is a compact, portable floor-based power amplifier ideal for guitar players that rely on effects pedals, amp modelers, and other processors to produce their sound. The Loudster is particularly perfect for traveling/gigging musicians looking to ditch their traditional amp setup, and instead house their entire fly rig on a pedalboard.
Key Features:
• Compact, portable floor power amplifier
• 75 watts of output power for effects pedals, amplifier modelers and other processors
• Single, large volume knob
• Single speaker output for use with 4-16 omega cabinets
• High impedance input
• Lightweight aluminum chassis
• Included 18-20V DC (center positive) power supply
MORE»
| List | $149.99 |
The Warm Audio Limited Edition Silver Centavo is an accurate recreation of the most sought-after overdrive pedal of the 90's and beyond. Whether you're after the fabled clean boost tones, transparent overdrive, or you want to push your dirty channels to true grit – the Centavo has all of the adored tones of the vintage box. In addition, the Warm Audio Centavo has the infamous “MOD” selectable on the back. When in the “up” position, low-end response on the bottom strings is extended. With a true-to-original, custom-cast vintage silver enclosure and the signature sounds of the original, Centavo delivers an exclusive and authentic pedal experience.
MORE»
| List | $179.00 |
Are switching boxes giving you a headache? Our ABC Pro Selector is just what the doctor ordered! Based off the original Morley ABC Switcher our Pro version is equipped with new features that will help solve issues commonly faced when using switching devices for multiple amps. New features include a higher enclosure for easy access, a custom built Morley transformer, silent switching, a reverse polarity switch and a ground lift switch.
Features include:
• The ultimate amp selector – Route 1 input into 3 outputs; Choose A, B, or C individually or in any combo
• Custom Morley 1:1 isolation transformer for absolute transparency and level output
• Silent Switching to prevent pops and bleed
• Reverse polarity switch to prevent phasing issues
• Ground Lift switch to combat hum from ground loops
• High Frequency Filter activates when Ground Lift is engaged to eliminate unwanted frequencies
• Powered by one-9v battery or optional Morley 9v adapter
• LED indication, quick clip battery door and one-year warranty
MORE»
| List | $279.00 |
The Bitmap(TM) is a stereo bitcrusher with fractional bit reduction and sample rate modulation. The Bitmap 2 adds waveshaping, wavefolding, and a window comparator for extreme digital distortion. A drive control handles everything from single coil guitars to synthesizers, with +8 dBu maximum signal level and plenty of gain with overdrive. Modulation and envelope control create dynamic, responsive distortion and digital artifacts.
The Bitmap 2 is tuned to provide maximum sustain without sputtering on staccato notes. Less extreme settings add layers of nonlinearities that interact in subtle ways, giving you the warmth and grit of 8- and 12-bit samplers. Sample rate reduction turns your guitar into 8-bit video game sounds or twists scales into inharmonic melodies. Sample rate modulation adds subtle motion or morphs your guitar into entirely new textures.
The Bitmap(TM) works with guitar, bass, synthesizers, drum machines, and other instruments or line level sources. A web-based editor allows you to edit presets and access additional parameters and modulation destinations.
Features:
• Fractional bit reduction from 24-bits down to 1-bit
• Sampling rate reduction from 48 kHz down to 110 Hz
• Sample-rate modulation with triangle, square, and random waveforms
• Adjustable wavefolding and waveshaping functions
• Mix control to maintain bass or add subtle crushing
• Envelope control over sampling rate or mix
• Drive control to accommodate single or dual coil pickups and line-level signals
• 4-pole lowpass filter
• Stereo input/output (TRS)
• Soft touch bypass (momentary or latching), user replaceable
• Aux. footswitch assignable to tap tempo or preset selection
• Assignable expression pedal, remote switch, remote tap, or MIDI port
• Additional parameters via MIDI (USB or TRS)
• MIDI clock synchronization
• Presets (4 on front, 127 via MIDI)
• Web-based editor for editing presets and accessing hidden parameters
• Filter cutoff can be modulated by envelope or LFO (via editor, saved to preset)
Designed and assembled in USA. Requires a 9V 250 mA center negative power supply (not included).
MORE»
| List | $329.00 |