Everything you love about the iKlip Xpand is now available for smart phones in a mini version! With iKlip Xpand Mini, musicians and performers alike can bring their favorite apps on stage. It's perfect for lyrics, sheet music, karaoke, effects processors for guitar or vocals, virtual instruments and synths, DJ and other groove-making apps. It is made from rugged thermoplastic for years of solid performance.
iKlip Xpand is a new microphone stand mount for tablets. Its expandable design fits the iPad (from mini to Air, all generations), Samsung Tab, Galaxy Nexus, Kindle Fire, and most other 7″ to 12/1″ tablets. With iKlip Xpand, musicians and performers alike can bring their favorite apps on stage, so it's perfect for lyrics, sheet music, karaoke, effects processors for guitar or vocals, virtual instruments and synths, DJ and other groove-making apps. The expandable arms allow for the quick and easy installation of a tablet into iKlip Xpand, even with a case, and its ball-joint design lets you easily adjust the viewing angle, rotate freely between portrait and landscape orientation. It fits poles up to 1.2″ (30.5 mm) in diameter, and keeps all buttons and ports freely accessible.
iRig BlueBoard is the first wireless MIDI pedalboard for iOS and Mac that allows you to control your music apps and more from the floor.
Now control parameters of your MIDI-compatible apps like AmpliTube wirelessly from the floor. Switch between presets, change patches, turn effects on and off and control effects like volume wah pedals all from the stage floor without worrying about tripping over wires. Setup is as simple as turning the iRig BlueBoard on and telling it what you want to control.
iRig BlueBoard features four backlit soft-touch pads housed in a sturdy, stage-worthy chassis, two TRS expansion jacks for connecting additional MIDI controllers like expression pedals, and is powered by four standard AAA batteries.
Have you ever been in a situation where you didn't have the right cable for the job? With the iLine Mobile Music Cable Kit, you'll never be without options. The kit is a complete collection of six high-quality audio cables (with a convenient travel case), designed to provide users of smartphones, tablets, MP3 players and laptops with the tools they need to handle virtually any signal routing and audio-cabling situation. The kit covers a wide range of mobile and audio applications, including hard-to-find ones like converting stereo signals to mono, extending a headphone cable (and still being able to use the built-in mic), or easily connecting your phone or laptop to DJ or home stereo gear. MORE»
iKlip Stand is a new tabletop holder that raises your iPad and iPad mini above the desktop, positioning it for perfect access while using keyboards, mixers, controllers and other equipment.
•¦Sturdy, robust thermoplastic with metal reinforced base
•¦Tall enough to fit a keyboard, mixer or other studio device underneath
•¦Two independent articulations for maximum flexibility
•¦Adjustable viewing angle
•¦iPad orientation can switch from portrait to landscape
•¦Available as a stand or desk clamp system MORE»
Introducing the iKlip 2 for iPad – a newly designed multi-angle lightweight universal iPad microphone stand adapter. We've taken the hugely successful iKlip Microphone Stand Adapter and made it even better and easier to use. Now take your favorite iPad music apps to the stage for live performance with solid, dependable secure support and multi-angle global positioning. With its new ball joint multi-angle adjustable design, you can securely position your iPad for optimal viewing and accessibility, while all controls, buttons and connection ports remain free from obstruction. Now you can quickly and easily switch from horizontal to vertical orientation without additional tools. Plus, the iKlip 2 can now be attached to beefier mic stand poles – up to 1.2″ diameter. MORE»
This cable converts 1/8″ (3.5mm) stereo output to 1/4″ (6.35mm) mono signal. Use this to send your stereo output from your device into a mono input device like a guitar amplifier or a mono-input powered speaker. Use it to connect your iRig and AmpliTube setup on your device to your guitar amplifier. It features a 3.5mm (1/8″) male connector and a 1/4″ (6.35mm) mono female connector. (Use your standard 1/4″ guitar or speaker cable to complete the connection.) Length: 11.8″ (30cm). MORE»
Extends the range of your device output jack, including signal input and microphone capability. Use this one when you want to use your iRig, iRig MIC, iRig MIC Cast or headset with more room to move around, especially if you talk with your hands a lot. It features a TRRS Male and a TRRS female jack. Length: 23.6″ (60cm). MORE»
You'll probably use this one the most. It's a simple, straightforward stereo output extender for sending the stereo signal from your device to a 3.5mm stereo input (female) jack. It features two 1/8″ (3.5mm) male jacks. Length: 59″ (150cm) MORE»
This one is perfect for sending the signal from your device to the L/R inputs in a stereo channel on a mixer. The unique 1/4″ mono female jacks let you use your standard signal cables to freely place your device on stage while running your signal to the front of house mixer. It features a 1/8″ (3.5mm) male jack and two 1/4″ (6.35mm) female jacks. Length: 23.6″ (60cm). MORE»
As the name implies, this one takes a single stereo pair from your device and makes two out of it. Use this on long road trips with your kids (if they like the same movie) or just to monitor new songs you've written on your iPhone. This is a very handy cable. It features one 1/8″ (3.5mm) TRS stereo male plug and two 1/8″ (3.5mm) TRS stereo female jacks. Length: 11.8″ (30cm). MORE»
If you want to connect your mobile device to your home stereo receiver or DJ Mixer, this is your cable. It splits the stereo output from your device into left & right mono RCA inputs. It features a 1/8″ (3.5mm) male jack and two mono male RCA jacks. Length: 59″ (150cm). MORE»
Desktop/tabletop holder for iPad Mini MORE»
iRig™ Mic Cast is a quality condenser microphone, specifically designed to record vocal speech, in a compact enclosure with a stylish form factor, that plugs directly into any iPhone, iPod Touch, or iPad. Now anybody can make professional audio recordings for podcasts and interviews – even live broadcasts – anywhere. The iRig Mic Cast plugs directly into the 1/8-inch mini jack on the iOS device, and it features a clip that holds the mic in place on any iOS device. When used with iPhones or iPod Touches, the on-the-go user can hold it with just one hand. iRig Mic Cast also comes with a handy detachable tilted tabletop stand for easy desktop or podium operation. The microphone itself has an adjustable tilt angle for optimum positioning. It also has a cardioid (unidirectional) polar pattern and a very effective pop filter for close miking of the human voice. The mic has a continuous gain control to help the user easily achieve the best signal-to-noise ratio and a tone control to adjust the color of the recording. The integrated built-in headphone output allows for real time monitoring. MORE»
iKlip™ Studio is an adjustable desktop stand for iPad, designed to hold your device steady while using a variety of music, gaming, and other apps. With an adjustable angle and no-slip rubber base, even heavy-handed users can now use multi-touch gestures without worrying about the device slipping or having to hold the device. For musicians, iKlip Studio allows you to use your iPad as a seamless part of your existing studio. Keep your device positioned at the ready for use as a control surface, instrument, display, and more, without worrying about it sliding mid-performance. Its foldable design allows it to slip into your existing iPad or laptop bag for use on the go. The iKlip Studio is made of rugged thermoplastic for reliability. MORE»