70 Items Found
HAL LEONARD
Pro Series - Studio & Live XLR Cable (25-Foot)
Model: 03720140

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $44.99

Compare

HAL LEONARD
Pro Series - Studio & Live XLR Cable (15-Foot)
Model: 03720138

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $35.99

Compare

HAL LEONARD
Pro Series - Instrument Cable (10-Foot)
Model: 03720132

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $29.99

Compare

HAL LEONARD
Mini Digilink (M) to Mini Digilink (M) 12 Feet
Model: 00119327

The˙Avid Mini-DigiLink (M) to Mini-DigiLink (M)˙cable is a high-quality cable that's great˙for linking HD interfaces to HD Native PCIe cards.
MORE»

List $99.00

Compare

HAL LEONARD
Pro Series - Studio & Live XLR Cable (3-Foot)
Model: 03720141

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $19.99

Compare

HAL LEONARD
Pro Series - Studio & Live XLR Cable (10-Foot)
Model: 03720137

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $29.99

Compare

HAL LEONARD
Pro Series - Instrument Cable (20-Foot)
Model: 03720135

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $39.99

Compare

HAL LEONARD
Pro Series - Studio & Live XLR Cable (20-Foot)
Model: 03720139

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $37.99

Compare

HAL LEONARD
DB25-XLRM DigiSnake 4'
Model: 00119322

DigiSnakes make connecting your gear a quick and easy process, freeing you to spend your valuable time on your audio projects rather than the wires they travel across. Avid offers an array of quality cabling options to ensure the reliable passage of audio signals as they travel between the I/O components of your Pro Tools system. Uniquely designed for Avid gear, DigiSnakes are custom colored and labeled, and feature a lifetime warranty, making for consistent and organized patching solutions.

DigiSnakes include all the various audio snakes providing connections between your studio and Avid's control surfaces, I/O's and interfaces. All DigiSnakes are designed with 110 ohm digital grade cable, allowing them to accommodate either digital or analog signals.

This 4-foot DigiSnake features a DB-25 connector at one end and eight XLR-Male connectors at the other to handle analog or digital audio outputs. Matching red jackets on both ends with appropriate labeling help you make correct connections.
MORE»

List $109.00

Compare

HAL LEONARD
Pro Series - Instrument Cable (5-Foot)
Model: 03720136

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $23.99

Compare

HAL LEONARD
DB25-XLRF DigiSnake 4'
Model: 00119323

DigiSnakes make connecting your gear a quick and easy process, freeing you to spend your valuable time on your audio projects rather than the wires they travel across. Avid offers an array of quality cabling options to ensure the reliable passage of audio signals as they travel between the I/O components of your Pro Tools system. Uniquely designed for Avid gear, DigiSnakes are custom colored and labeled, and feature a lifetime warranty, making for consistent and organized patching solutions.

DigiSnakes include all the various audio snakes providing connections between your studio and Avid's control surfaces, I/O's and interfaces. All DigiSnakes are designed with 110 ohm digital grade cable, allowing them to accommodate either digital or analog signals.

This 4-foot DigiSnake features a DB-25 connector at one end and eight XLR-Female connectors at the other to handle analog or digital audio outputs. Matching red jackets on both ends with appropriate labeling help you make correct connections.
MORE»

List $109.00

Compare

HAL LEONARD
Pro Series - Studio & Live XLR Cable (6-Foot)
Model: 03720143

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $24.99

Compare

HAL LEONARD
Pro Series - Studio & Live TRS Cable (5-Foot)
Model: 03720129

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $28.99

Compare

HAL LEONARD
Pro Series - Studio & Live XLR Male to TRS Male (6-Foot)
Model: 03720147

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Professional Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $24.99

Compare

HAL LEONARD
Premier Series - Studio & Live XLR Cable (15-feet)
Model: 03720114

Warm Audio has partnered with Switzerland-based Gotham AG – Europe's top producer of premium cable – to provide the cable stock for their entire line of interconnects. Warm Cables deliver the highest quality possible at a price low enough for everyone to afford, with construction robust enough that they offer a lifetime warranty. Well known as the original supplier to some of the industry's elite manufacturers (their 3-conductor wire was simply known as “the Neumann Cable” for decades), Gotham's cable construction tecniques and technology now represent the current state-of-the-art. The Premier Cable line takes advantage of Gotham's construction, offering absolutely stellar audio performance, near-perfect signal transfer, and the ultimate in reliability (which is why they feature a lifetime warranty!). The Premier line also features gold-plated connectors, a braided outer wrap, four-conductor StarQuad construction for powerful rejection of RFI and Double-Ruessen shielding for increased rejection of EMI. There is simply no better-sounding or reliable cable on the planet – and at a pricetag everyone can afford!

What does “StarQuad” mean?

A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable's length by removing signals that are common to both the hot and cold legs.

StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.

What is “Double-Ruessen Shielding”?

Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from electromagnetic interference. Double-Ruessen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from EMI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of balanced cable technology currently.
MORE»

List $55.99

Compare